Do you know the polishing process of the glass-lined reactor

When the glass-lined reactor is first produced and processed, its surface is not smooth and flat. It will become increasingly smooth and flat only after being polished as much as possible. Therefore, the grinding process is a very important production process for this machine equipment. Then let me introduce the polishing process to all of you.

The grinding of the glass-lined reactor is usually carried out in a grinding machine or with a portable grinding wheel. The grinding requirements are to remove the weld slopes on the surface of the glass-lined reactor, the sharp edges, and the oxide scale and inclusions to highlight the original color of the equipment.

2. If the surface of the metal composite material has an oxide layer, surface crust, arc welding casting defects, or oil waste adhered during the entire process of mechanical processing and manufacturing, it will affect the firing quality. Therefore, grinding is necessary.

3. Polishing can make the surface of the base body uneven, increase the surface activation energy and specific surface area, and thereby enhance the adhesion between the metal composite material of the base body and the base glaze.

4. Sometimes, when the carbon content in the glass-lined reactor exceeds the standard, the method of high-temperature surface polishing is also adopted as a compensation solution.

Therefore, the production and processing conditions of each glass-lined reactor are different, and the polishing treatment levels required are also not the same. Thus, when performing polishing treatment on the reactor equipment, it is essential to pay attention to the polishing treatment processing level.